Raimondi Levelling System (R.L.S.) is a revolution in the tile laying. In addition to ensuring the proper levelling of tiles, this system helps to speed up the tile laying process. R.L.S. is strongly recommended when installing any size of tile be it large format square's or rectangle wooden grain type. R.L.S. is made up of three elements: clips, wedges and pliers. The clips in the kit or for tiles from 3 up to 12 mm. The wedge are re-usable virtually forever. Special traction-adjustable pliers are available in two different versions: for floor or for wall coverings. In addition to carrying out the levelling function the 3D clip can be used in cross or T joints and half bond for brick slips. Thanks to the retractable fins in the spacer elements 3D can be positioned both on the cross-section and the sides of the tiles. In the case of laying of large sizes, for which it is only necessary to placed them in intersections to guarantee the perfect levelling. The 3D can be used with the same wedges and pliers of other bases of the R.L.S system. The 3D clip reduce transport volumes of 50% compared to standard R.L.S. The use of the pliers is suggested for facilitating and speeding up the insertion of the wedge in the clips. It also optimises the pressure on the tile. R.L.S is the easiest and quickest to remove levelling system is enough to kick the top part of the clip to remove the unnecessary part from the installed floor. No tool required.