- Manufacturer
- Mapei
- Abrasion Resistance
- ≤ 0.015 cu. in. (250 mm3)
- Application
- Residential, Commercial and Industrial
- Certification
- LEED v4 Points Contribution and Green Certifications
- Chemical Resistance
- Yes
- Collection Name
- Kerapoxy CQ
- Color
- Blue
- Color Number
- 5231
- Color Number
- 5231
- Compressive Strength
- > 6525 psi (45 MPa) | Pass > 3500 psi (24.1 MPa) (ANSI A118.3 (5.6))
- Cure Time
- 14 days (At 73°F (23°C) and 50% relative humidity)
- Dry Time
- Protect grout installations for at least 7 days, and wait at least 3 days before checking hardness
- Flexural Strength
- > 4350 psi (30 MPa)
- Indoor Usage
- Yes
- Liter (L)
- 3.79
- Maintenance and Cleaning Rating
- Pass - Water cleanability 80 minutes (ANSI A118.3 (5.1))
- Manufacturer Color Name
- Deep Ocean
- Material
- 100% Solids Epoxy
- Open Time
- Tensile adhesion strength: 20 minutes (≥ 0,5 N/mm² after not less than)
- Outdoor Usage
- Yes
- Physical Properties
- Resin (Part A) and hardener (Part B)
- Pot Life
- 45 to 60 minutes (At 73°F (23°C) and 50% relative humidity)
- Shelf Life
- 2 years when stored in original, unopened packaging at 73°F (23°C)
- Shower Approved
- Yes
- Shrinkage
- < 0.06 in/3.28 ft (1.5 mm/m) | Pass < 0.25% (ANSI A118.3 (5.3))
- Spacing Maximum (mm)
- 10
- Spacing Minimum (in. fraction)
- 1/16
- Spacing Minimum (in.)
- 0.0625
- Spacing Minimum (mm)
- 1.5
- Spacing maximum (in. fraction)
- 3/8
- Spacing maximum (in.)
- 0.38
- TVOC Emission
- 8 g per L
- Temperature Range
- Application: 60°F to 90°F (16°C to 32°C)
- Tensile Strength
- Pass > 1000 psi (6.90 MPa) (ANSI A118.3 (5.7))
- Thermal Resistance
- Pass > 500 psi (3.45 MPa) (ANSI A118.3 (5.8))
- Traffic Classification
- Residential, Commercial, Industrial and Institutional
- Use On
- AS GROUT: Interior: Floor/Wall | Exterior : Floor || AS MORTAR: Wall, floor and countertop installations
- Water Absorption Rate
- < 0.0002 lb (0.1 g)
- Working Time
- Initial setting time: Pass > 2 hours | Service setting time : Pass < 7 days (ANSI A118.3 (5.2))