- Manufacturer
- Dyna
- Approximate Coverage Text
- 25 to 30 square meters (275 to 325 sqft) per 3.78 L (1 gallon) depending on the surface treated
- Boiling Point
- 195°C
- Collection Name
- DynaMatrix PS-1
- Color
- Translucent
- Density
- Specific Gravity: 0.83642
- Evaporation Rating
- 0.12 n-butyl acetate = 1
- Flash Point
- > 212°F (> 100°C) (ASTM D 3278)
- Indoor Usage
- Yes
- Liter (L)
- 3.78
- Manufacturer Color Name
- Translucent Clear
- Maximum Installation Temperature
- 25° C (77° F)
- Minimum Installation Temperature
- 18° C (65° F)
- Norm ASTM
- Reduction of Under Absorption (compared to untreated surface) (ASTM C 97): 90% | Standard Test Method for Water Penetration and Leakage Through Masonry (compared to untreated control) (ASTM E 514): 100%
- Odor
- Sweet / acetic
- Outdoor Usage
- Yes
- Percent Volatile (%)
- 60 - 90%
- Shelf Life
- 5-Year
- Storage Conditions
- Keep in storage at temperature between 10 °C (50 °F) and 22 °C (72 °F)
- TVOC Emission
- < 349 g/L
- Tool of use
- Use a slit foam roller and a metal paint tray. If you wish to use a sprayer to apply the PS-1 Penetrating Sealant, make sure that you back roll the surface immediately with the slit foam roller to even out the surface
- U.S. Gallon
- 1
- UV Ray Resistant
- UV Stable
- Use On
- Colored porous concrete surfaces such as: Interlocking Concrete Pavers, Stamped Concrete, Cementitious Surfaces, Terrazzo Floors, Masonry Brick, Stucco and Grout Joints
- Vapor Transmission
- 91% (ASTM E 96)
- Warning Information
- POISON, COMBUSTIBLE: MAY CAUSE SKIN AND EYE IRRITATION. CONTENTS MAY BE HARMFUL. FUMES MAY BE HARMFUL. Do not swallow. Do not get in eyes or on skin or clothing. Do not breathe fumes. Do not take internally. Wear a mask. Wear rubber gloves and safety glasses. Use only in a well-ventilated area. | Keep away from flames or sparks. Refer to SDS (Safety Data Sheets) for additional information | KEEP OUT OF REACH OF CHILDREN
- Water Absorption Rate
- 0.9
- Water Clean-Up
- No, clean all tools with lacquer or paint thinner