Schluter KERDI
Schluter KERDI is a pliable, sheet-applied waterproofing membrane and vapour retarder that you bond with thin-set mortar, then tile directly over. Its modified polyethylene (PEVA) core is fleece-backed on both sides so it anchors in the mortar, and it is 8 mil thick throughout. Use it on walls and floors in tiled showers, bathtub surrounds, residential steam showers and other wet areas. Choose a 1 m (3' 3") wide roll from 54 to 323 sq ft, or a 2 m (6' 7") wide roll of 323 or 646 sq ft that covers a wall from the floor to standard shower-head height with fewer seams. FloorBox delivers across Canada.
Frequently asked questions
See all FAQsWhat is Schluter KERDI membrane and where can I use it?
KERDI is a pliable, sheet-applied waterproofing membrane and vapour retarder made for ceramic and stone tile. You bond it in thin-set mortar on walls and floors, then tile directly over it. Schluter lists it for showers, intermittent-use steam showers, tub surrounds and areas around indoor pools. A good starting size is the 108 sq ft KERDI roll.
Is Schluter KERDI waterproof?
Yes. Schluter describes KERDI as waterproof, and it meets the ANSI A118.10 standard for bonded waterproof membranes under thin-set tile. The assembly is waterproof once the whole membrane, including seams, corners and connections, is fully bonded. Schluter recommends waiting 24 hours before you water-test it. Seal joints with KERDI-BAND.
How do I seal the seams and corners of KERDI membrane?
Overlap the edges by 2 in. (5 cm), or butt them together and cover the joint with KERDI-BAND, bonded with unmodified thin-set mortar. Use preformed KERDI-KERECK corners for inside and outside corners, and KERDI-BAND for floor-to-wall joints. Seal the showerhead and other pipes with KERDI-SEAL-PS, or with KERDI-FIX.
What thin-set do I use to install KERDI and to tile over it?
The mortar must suit your substrate and work into the KERDI fleece. Schluter generally uses its own SET, ALL-SET or FAST-SET mortars or an unmodified thin-set, applied with a 1/4 x 3/16 in. (6 x 5 mm) V-notch trowel or the 1/8 x 1/8 in. (3 x 3 mm) KERDI-TROWEL. Set the tile with unmodified thin-set right on the KERDI. For acid-resistant work, use an epoxy adhesive and grout.
Which KERDI roll size do I need for my shower?
Rolls come 1 m (3' 3") wide in 54, 75, 108, 215 and 323 sq ft, or 2 m (6' 7") wide in 323 and 646 sq ft. A 2 m wide roll covers a wall from the floor to standard shower-head height, so you have fewer seams. For walls in one width up to shower-head height, see the 2 m x 15 m roll (323 sq ft). Not sure how much you need? Contact us.
Can I use KERDI in a steam shower?
KERDI suits residential steam showers, which Schluter calls intermittent-use steam showers. For continuous-use steam rooms, Schluter specifies KERDI-DS, a 20 mil membrane with a much lower vapour permeance (0.19 perms vs 0.90 for KERDI). Have questions about your project? Contact us.
Can’t find your answer?
Browse the general FAQ, chat with a flooring specialist or send us a message.