Recent searches

Loading results...
No results found for ""
Loading results...
Samples
My Lists
Shopping cart

Schluter RENO-U

Schluter RENO-U is a sloped reducer profile that protects the tile edge and gives a smooth transition from tile down to a lower floor or finished concrete. Its perforated anchoring leg sets in the thin-set under the tile, and the sloped face of about 25 degrees helps prevent tripping. Choose a height from 1/8" to 3/4" to match your tile, in anodized aluminum, stainless steel or solid brass. Each profile is 8' 2-1/2" long.

Frequently asked questions

See all FAQs
What is Schluter RENO-U used for?

RENO-U is a sloped reducer profile for tile. It protects the exposed tile edge and gives a smooth transition down to a lower floor covering, typically vinyl composition tile (VCT), or to finished concrete. The leading edge of the profile abuts the lower floor. For other heights and situations, see all Schluter floor transitions.

How do I choose the right RENO-U height?

Choose the profile by tile thickness. The profile should sit flush with the tile surface or slightly lower, by about 1/32" (1 mm), never higher. If you install over a Schluter uncoupling membrane such as Schluter DITRA, add the thickness of the membrane that covers the anchoring leg. RENO-U comes in eight heights from 1/8" (3.5 mm) to 3/4" (20 mm); for example, see the 3/8" satin anodized aluminum.

Which RENO-U materials and finishes can I choose from?

RENO-U comes in anodized aluminum, stainless steel and solid brass. Aluminum finishes include satin, satin nickel, brushed nickel, brushed antique bronze, bright chrome and satin brass. Stainless steel comes plain or brushed. Not every height comes in every finish: 1/8" is satin aluminum only, and 7/16" and 3/4" are stainless steel only. Examples: satin nickel 3/8", brushed antique bronze 3/8" and brushed stainless steel 1/2".

How do I install Schluter RENO-U?

Fill the cavity under the sloped section with thin-set mortar. Trowel thin-set where the profile goes, press the perforated anchoring leg into it and align the profile. Then cover the leg with more thin-set so the tile edge is fully supported, and set the tile flush with the top of the profile. Aluminum RENO-U has a built-in joint spacer that gives a uniform 1/16" to 1/8" (1.5 to 3 mm) joint; with stainless steel, leave about the same space. For help with your project, contact us.

How long is a RENO-U profile?

Every RENO-U we carry is 8' 2-1/2" (2.5 m) long, in all heights and finishes. Measure the length of the transition and cut the profile to size. For a stainless steel option, see the 3/4" stainless steel RENO-U; for the lowest height, the 1/8" satin aluminum.

How do I clean and care for RENO-U?

RENO-U needs no special maintenance and resists mold and fungi. Clean it from time to time with a neutral cleaner. On stainless steel, avoid strong acids and alkaline cleaners such as bleach, ammonia or chlorine. Don't use abrasive cleaners or tools, especially on anodized aluminum. Exposed brass or aluminum can develop an oxidation film that ordinary polish removes, though it will come back.

Can’t find your answer?

Browse the general FAQ, chat with a flooring specialist or send us a message.

Exclusive sales up to 40% off

Get special deals & price drop alerts straight to your inbox.