Tec Power Grout
TEC Power Grout is an advanced performance grout for tile and stone joints from 1/16 to 1/2 in. wide, on walls and floors, indoors and outdoors. TEC says it gives strong, colour-consistent joints with no efflorescence, resists shrinking and cracking, and never needs sealing. It opens to foot traffic in about 4 hours and is rated for residential to extra heavy commercial use. Choose your colour by number and name, in 10 lb or 25 lb bags, and order online at FloorBox.
Frequently asked questions
See all FAQsWhat is TEC Power Grout?
Power Grout is TEC's advanced performance grout for tile and stone. When mixed with water, it exceeds ANSI A118.7 (polymer-modified cement grout) and meets the listed ANSI A118.3 requirements for epoxy grout, with ISO 13007 classification CG2WAF. It is made for joints from 1/16 to 1/2 in. (1.6 to 12 mm) wide, on walls and floors, indoors and outdoors, from homes to extra heavy commercial floors. Browse all TEC grout.
Does Power Grout need to be sealed?
No. TEC says Power Grout never needs sealing. It resists most common water-based stains when they are cleaned up right away, and it reaches full stain resistance after 7 days of curing. If you seal the tile or stone after grouting, TEC calls for a compatible solvent-based sealer, tested first on a small area, and a 72-hour wait before sealing.
What colours and bag sizes does Power Grout come in?
Each colour has a number and a name, from whites such as #910 Bright White and #912 Optic White to greys such as #909 Sterling and #949 Silverado, beiges, browns and #950 Jet Black. Most colours come in 10 lb and 25 lb bags; some are listed only in the 25 lb (11.34 kg) bag. Each product page shows the colour and bag size. See Power Grout #949 Silverado or #950 Jet Black.
How long before I can walk on it or use the shower?
At about 72°F (22°C), Power Grout has a pot life of 35 to 55 minutes and an initial cure of 3 to 4 hours. Protect the floor from foot traffic for at least 4 hours, and wait 24 hours before mopping, routine cleaning or using the shower. Keep it away from stains, full water immersion and freezing for 7 days; final cure is 21 days. Heat and humidity change these times.
How much Power Grout do I need?
It depends on tile size and joint width. TEC's coverage chart gives, per pound, about 19.42 sq. ft for 12 x 24 x 3/8 in. tile with 1/8 in. joints, 14.58 sq. ft for 12 x 12 x 3/8 in. tile with 1/8 in. joints, and 7.29 sq. ft for 3 x 6 x 1/4 in. tile with 1/8 in. joints. Wider joints and smaller tiles use more grout. The full chart is in the product data sheet on each product page, such as Power Grout #909 Sterling.
What should I check before grouting with Power Grout?
Joints should be clean, free of spacers and at least two thirds of the tile thickness deep. Work between 50 and 80°F (10 to 27°C), and don't grout below 50°F (10°C). Mix with a drill at 350 rpm or less, let it slake 3 to 5 minutes and remix. TEC notes it may scratch polished marble, polished porcelain, glass, metal or glazed tiles, so test a small area first. You'll need a hard rubber grout float and grout sponges. Not sure which grout fits your tile? Contact us.
Can’t find your answer?
Browse the general FAQ, chat with a flooring specialist or send us a message.