Schluter-DITRA-HEAT-DUO-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-DUO-PS is an uncoupling membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with of DITRA-HEAT-HK floor heating cables to create a warm tiled floor.
-
Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into substrate
-
If application area requires a membrane that meets or exceeds requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO. Alternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the Schluter-KERDI membrane, which is certified to meet ANSI A118.10
-
No thin-set required to install membrane means a faster and easier installation
-
The membrane can easily be repositioned until pressure is exerted
-
Features sound control and thermal break
-
Reduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction
-
It also reduces heat loss to the substrate and speeds up the response time by up to 70% for underfloor heating systems installed on concrete substrates
-
Less mess, less cleanup, and fewer tools required
-
Nominal 5/16” (8 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
-
Self-leveling compounds are not required to encapsulate the cables into the membranes