SKU: 8210-1 by Dyna

Dyna Grout Film Remover and Wash Ceracid 8210 for Cceramic Tile and Natural Stone 946 ml

  1. •
  2. •
Dyna (8210-1) product

Currently unavailable for your ZIP code

Please edit your ZIP code or contact us for more informations

Additional details

DYNA CERACID 8210 is a premium performing efflorescence and grout film remover for residential, commercial, and industrial ceramic tile, clay tile, and porcelain tile installations. This product is formulated to remove grout film and efflorescence remaining after new installations. It can also be used on old installations to remove efflorescence emerging from soluble calcium salts appearing on the surface.

  • Removes efflorescence & grout film emerging from soluble calcium salts appearing on the surface

Manufacturer
Dyna
Application
Residential, Commercial & Industrial
Collection Name
Ceracid 8210
Indoor Usage
Yes
Liter (L)
1
Maximum Installation Temperature
40° C ( 104° F )
Minimum Installation Temperature
0° C ( 32° F )
Mixing Ratio
Mix approximately 89 to 177 ml (3 to 6 fluid ounces) in a bucket with 3.78 L (1 gallon) of warm clean water
Outdoor Usage
Yes
Tool of use
Mop, brush or sponge
Use For
Masonry, and brick veneer cladding
Use On
Floors & Walls
Use With
Mop, brush or sponge
Warning Information
Avoid direct contact with skin. If in contact with skin rinse with clean water. Avoid contact with eyes. If in contact with eyes rinse thoroughly for 15 minutes with clean water. If swallowed drink plenty of water and seek medical attention immediately | KEEP OUT OF REACH OF CHILDREN | Refer to SDS (Safety Data Sheets) for additional information

  • Technical Data Sheet Ceracid 8210 (2018)

Additional details