The Max Series push handle creates less user fatigue when compared to the traditional pull style handle. It is equipped with a spring loaded scoring wheel that is wrapped around a stainless steel ball bearing. This ensures not only the smoothest feel possible but gives the wheel the ability to adapt to the undulations of a textured surface. The results are incredible! Serie 3 MAX - “New series with Max hand-grip” The scoring wheel on ball bearings is vibration-damped so as to score thicker tiles or ones with relief surfaces with minimum effort. The change from scoring to breaking position is achieved by a small vertical movement of the hand-grip. Broad tile support table, with the added advantage of measurement conveniently close to the operator. Double registration for regulation of cutting thickness. The swivelling measurement bar supporting the tile rotates through 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the piece to be cut to be obtained. A 45° a second measurement scale gives the length of the diagonal. Measurements are in centimetres, or inches on request. The rapid positioning button makes the main angles normally used immediately available. Easy to dismantle to ensure compact dimensions for easy transport. Cuttings system by pushing Extremely strong, allows particularly thick or difficult materials to be easily cut, with the added advantage of measurement conveniently close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile. .

• Super smooth ball bearing centred 19mm scoring wheel
• Sprung 'suspension' scoring especially suited to uneven and riven tiles
• Score by pushing (can pull also)
• Flip down breaker allows breaking all the way along tile length
• Rotating ruler / measure bar rotates up to 45 degrees either way
• True sprung loaded base plates
• Excellent on porcelain tiles
• Maximum tile thickness: 20mm (NOT RECOMMENDED FOR 20mm THICK PORCELAIN)
• Clever duel metric scale for both square and 45 degree cuts (measure from corner of tile to cut line)