Recent searches

Loading results...
No results found for ""
Loading results...
Samples
My Lists
Shopping cart

Schluter KERDI-SHOWER-LTS

Schluter KERDI-SHOWER-LTS trays are prefabricated sloped shower trays made of lightweight expanded polystyrene. KERDI waterproofing is built in, and each tray is designed for the KERDI-LINE linear drain. Every tray slopes 2% toward the drain. The floor can slope on a single plane, so you can tile the shower floor with large-format tiles. Choose a drain along the wall in 36 x 55, 36 x 72 or 38 x 76 in., or a centre drain in 39 x 39, 48 x 48 or 55 x 55 in. Reduced perimeter heights make curbless showers easier to build. The trays are waterproof and ready to tile, and FloorBox delivers across Canada.

Frequently asked questions

See all FAQs
What is a Schluter KERDI-SHOWER-LTS tray?

It is a prefabricated sloped shower tray made of lightweight expanded polystyrene. KERDI waterproofing is built in. The tray is designed to receive the KERDI-LINE linear drain and slopes 2% toward it. Once installed, it is waterproof and ready to tile. See KERDI-SHOWER-LTS 36 x 72 in.

Which sizes and drain positions are available for KERDI-SHOWER-LT and -LTS trays?

It depends on the drain position you need. With the drain along a wall, FloorBox carries trays in 36 x 55, 36 x 72 and 38 x 76 in. With a centre drain, choose 39 x 39, 48 x 48 or 55 x 55 in. More wall-drain trays come in 39 x 39, 48 x 48 and 55 x 55 in., and in 38 x 76 in. with the drain on the long side. See KERDI-SHOWER-LT trays.

How thick are KERDI-SHOWER-LTS trays at the edges?

It depends on the size and the drain position. With the drain along a wall, the tray is 7/8 in. thick at the drain. It rises to 2 in. (36 x 55 in.), 2-5/16 in. (36 x 72 in.) or 2-3/8 in. (38 x 76 in.) at the opposite end. With a centre drain, the perimeter height is 1-1/4 in. (39 x 39 in.), 1-3/8 in. (48 x 48 in.) or 1-7/16 in. (55 x 55 in.). See, for example, the 48 x 48 in. centre-drain tray.

Do I need a linear drain with a KERDI-SHOWER-LTS tray?

Yes. The tray is designed for the KERDI-LINE linear drain, and Schluter also lists KERDI-LINE-VARIO as compatible. The drain and its grate are sold separately. Find them in KERDI-LINE or KERDI-LINE-VARIO, or see all Schluter linear drains and grates.

Can I build a curbless shower with KERDI-SHOWER-LTS trays?

Yes. Schluter designed the trays with reduced perimeter heights to make curbless showers easier to build. The single-plane slope toward a linear drain also lets you use large-format tiles on the shower floor. For an accessible entry, Schluter also makes the KERDI-SHOWER-R ramp, with integrated KERDI waterproofing. To waterproof the walls, see shower waterproofing membranes.

How do I install a KERDI-SHOWER-LTS tray?

Level the floor before you install the tray. Cut the flat end of the tray to fit around the KERDI-LINE channel support. Spread Schluter SET, ALL-SET, FAST-SET or an unmodified thin-set mortar with a 1/4 x 3/8 in. square- or U-notched trowel. Slide the tray under the edge of the channel body, flush with the channel support, and make sure it is fully bedded. When the drain sits along a wall, Schluter recommends cutting the tray from its thicker end. Installation guides are on each product page. Questions about your project? Contact us.

Can’t find your answer?

Browse the general FAQ, chat with a flooring specialist or send us a message.

Exclusive sales up to 40% off

Get special deals & price drop alerts straight to your inbox.