Schluter Linear Shower Drains & Grates
Schluter linear shower drains are made for tiled showers built with a bonded waterproofing assembly. KERDI-LINE combines a stainless steel channel body, 20 to 72 in. long with a centre outlet (offset outlet in select lengths), and a grate assembly you choose separately: SOLID, SQUARE, style or tileable. KERDI-LINE-VARIO comes in 4 ft and 8 ft lengths that you cut to size on site. The shower floor can slope on a single plane to the drain, so you can use large-format tile and build a curbless shower. For pros and DIY renovators, with delivery across Canada.
Frequently asked questions
See all FAQsWhat sizes do Schluter linear drains come in?
KERDI-LINE channel bodies with a centre outlet come in lengths from 20 in. to 72 in. (50 to 180 cm) in 4 in. (10 cm) steps. Offset outlet channel bodies, with the outlet located 8 in. (20.3 cm) from the end of the channel, come in lengths from 27-9/16 in. to 47-1/4 in. (70 to 120 cm). KERDI-LINE-VARIO comes in 48 in. and 96 in. (122 and 244 cm) lengths that you trim on site to fit the shower; the shortest allowable cut is 10 in. (25.4 cm), and the channel is 1-11/16 in. (43 mm) wide. Browse KERDI-LINE and KERDI-LINE-VARIO.
What is the difference between KERDI-LINE and KERDI-LINE-VARIO?
KERDI-LINE uses a fixed-length stainless steel channel body with a 2 in. (50 mm) no-hub outlet, in a centre or offset position, and a grate assembly sold separately. It can go against a wall or at an intermediate location in the shower. KERDI-LINE-VARIO has a stainless steel channel and grate that you cut to length on site, and a polypropylene flange that can sit anywhere along the trimmed length to clear obstacles such as floor joists. Schluter recommends KERDI-LINE-VARIO mainly against the wall, also in the centre of the shower, and KERDI-LINE for a drain at the shower entrance. At the entrance, Schluter suggests the SOLID grate or the tileable grate, with the drain openings spanning the full width of the entrance.
Is the grate included with a KERDI-LINE channel body?
No. A KERDI-LINE channel body kit includes the channel body with its KERDI collar, a channel body support, a no-hub coupling, 4 inside and 2 outside KERDI-KERECK corners, a KERDI-SEAL-PS pipe seal and a KERDI-SEAL-MV mixing valve seal; the grate assembly is chosen separately. For KERDI-LINE-VARIO, the grate and channel kit and the flange kit (KLVR2FLK) are also bought separately. A KERDI-LINE hair strainer that fits inside the channel body is available too.
What grate designs and tile thicknesses work with a KERDI-LINE drain?
Standard KERDI-LINE grate frames adjust to tile or stone from 1/8 in. to 1 in. (3 to 25 mm) and take a SOLID or SQUARE grate; style frames fit 1/4 in. to 23/32 in. (6 to 18 mm) with FLORAL, CURVE or PURE grates. The frameless tileable covering support sits flush with the channel body, so it can take any tile thickness. KERDI-LINE-VARIO grates come in SQUARE, FLORAL, HERRINGBONE and SLANT designs, with a minimum recommended tile thickness of 3/8 in. (10 mm).
Can I use a KERDI-LINE drain with a KERDI-SHOWER-LT or KERDI-SHOWER-LTS tray?
Yes. KERDI-LINE includes a polystyrene foam channel support that sets the drain at the right height for KERDI-SHOWER-LT and KERDI-SHOWER-LTS shower trays, and the KERDI-LINE-VARIO flange kit has matching foam supports. The floor can slope on a single plane to the drain, which lets you use large-format tile and build a curbless, open-concept shower. See KERDI-SHOWER-LTS and all Schluter shower bases & kits.
Will a Schluter linear drain connect to my ABS or PVC drain pipe?
KERDI-LINE has a standard 2 in. (50 mm) no-hub outlet that attaches to the pipe with a mechanical no-hub coupling, included in the channel body kit. The KERDI-LINE-VARIO flange has a standard 2 in. (50 mm) NPT outlet and comes with both an ABS and a PVC coupling adapter. Both work for new construction and renovations. Not sure which one fits your plumbing? Contact us.
Can’t find your answer?
Browse the general FAQ, chat with a flooring specialist or send us a message.