Schluter Shower Bases & Kits
FloorBox carries Schluter shower bases, pans and KERDI shower kits for tiled bathrooms. These waterproof, tile-ready trays have a built-in slope, so you can install a shower without a traditional mud bed. A complete KERDI shower generally includes the tray, the matching drain (a point drain or a KERDI-LINE linear drain, depending on the tray), KERDI waterproofing membrane or KERDI-BOARD wall panels, KERDI-BAND sealing strips at the seams, plus a curb and any niches. Choose your size and drain position, then add the matching parts. FloorBox delivers across Canada for installers and homeowners.
Frequently asked questions
See all FAQsHow do I choose the right Schluter shower base size?
Measure the shower area and pick a Schluter shower bases and kits tray that fits that footprint. KERDI shower trays come in several sizes, for example 38 x 60 in and 60 x 60 in centre-drain trays, and 36 x 36 in and 48 x 48 in thin-perimeter trays for curbless showers. Then add the matching drain.
How do I choose between a centre drain and an offset drain shower base?
Pick the drain position that matches your plumbing and layout. Schluter KERDI-SHOWER-T trays have the drain in the centre, while KERDI-SHOWER-TS trays place it off centre, 10 in from the end of the tray. Browse Schluter shower bases and kits and match the tray to where the drain must sit.
Can I build a curbless shower with a Schluter shower base?
Yes. Schluter KERDI-SHOWER-TT trays have a thin perimeter height that simplifies curbless shower construction, and the KERDI-SHOWER-R ramp helps create an accessible curbless entry. Browse Schluter shower bases and kits and follow Schluter's installation instructions for curbless showers.
What else do I need to complete a KERDI shower?
Once you have chosen the base size and drain position, add the matching drain (a centre or offset point drain, or a KERDI-LINE linear drain, depending on the tray), KERDI waterproofing membrane or KERDI-BOARD wall panels, KERDI-BAND sealing strips at the seams, a curb, and any niches you want. See also Schluter shower drains and Schluter linear shower drains. The bases are waterproof, tile ready and already sloped, so no traditional mud bed is needed.
Can I cut a Schluter shower base to fit my shower?
Yes. Schluter says KERDI-SHOWER-T, TS and TT trays can be cut to size when they do not match the shower compartment, ideally by equal amounts on all sides so the perimeter height stays consistent. The shower base can also be extended with dry-pack mortar. Waterproof any extended area with KERDI. Follow Schluter's installation handbook for the tray you choose, or contact us if you need help with your project.
What is the difference between a point drain and a KERDI-LINE linear drain for a Schluter shower?
A point drain (KERDI-DRAIN) sits in the centre or offset opening of trays such as KERDI-SHOWER-T, TS and TT. A KERDI-LINE linear drain uses a channel body. The shower floor can slope on a single plane toward the channel, which suits large-format tile and curbless showers. Match the drain to the tray. See Schluter shower drains and Schluter linear shower drains.
Can’t find your answer?
Browse the general FAQ, chat with a flooring specialist or send us a message.