Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
-
Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing
-
Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
-
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
-
Bonds directly to metal
-
PVC and ABS plumbing fixtures only
-
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
-
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
-
Exceeds ANSI A118.10 and A118.12 and IAPMO approved